Switching Modes - YASKAWA varispeed G7 CIMR-G7B series Instruction Manual

Switching Modes

The mode selection display will appear when the MENU Key is pressed from a monitor or setting display.
Press the MENU Key from the mode selection display to switch between the modes.
Press the DATA/ENTER Key from the mode selection key to monitor data and from a monitor display to
access the setting display.
Display at Startup
Mode Selection
Display
*
*
*
*
*
IMPORTANT
-6
3
*
*
*
*
*
Fig 3.3 Mode Transitions
When running the Inverter after using Digital Operator, press the MENU Key to select the drive mode (dis-
played on the LCD screen) and then press the DATA/ENTER Key from the drive mode display to bring up the
monitor display. Run Commands can't be received from any other display. (Monitor display in the drive mode
will appear when the power is turned ON.)
Monitor Display
The constant number will be displayed if a
constant has been changed. Press the
DATA/ENTER Key to enable the change.
Setting Display