YASKAWA varispeed G7 CIMR-G7B series Instruction Manual page 125

Name
Con-
Description
stant
Display
Number
Operation Used to set the method of
selection operation when the fre-
for setting quency reference input is less
E1-09 or than the minimum output fre-
less quency (E1-09).
0: Run at frequency reference
(E1-09 not effective).
b1-05 1: STOP (Frequencies below
E1-09 in the coast to stop
state.)
不足最低频
2: Run at min. frequency.
率动作
(E1-09)
3: Run at zero-speed (Fre-
quencies below E1-09 are
zero)
Read Used to set the responsiveness
sequence of the control inputs (forward/
input twice reverse and multi-function
inputs.)
b1-06 0: One scan every 5 ms (Use
for fast responses.)
顺控输入扫
1: Two scans every 5 ms (Use
描
for possible malfunction
due to noise.)
Operation Used to set the operation mode
selection by switching to the Remote
after mode using the Local/Remote
switching to Key.
remote 0: Run signals that are input
mode during mode switching are
b1-07 disregarded. (Input Run
signals after switching the
mode.)
1: Run signals become
本地 / 远程
切换
effective immediately after
switching to the Remote
mode.
Run Com- Used to set an operation inter-
mand selec- lock in programming modes.
tion in 0: Cannot operate.
program- 1: Can operate (Disabled
ming modes when Digital Operator is
b1-08
set to select Run Command
(when b1-02 = 0)).
2: Cannot operate. (Cannot be
PRG 指令选
择
in programming mode
during operation.)
Mode selec- Enable for machines that
tion for rotate the motor only in the
zero-speed same direction as the speed
reference. This setting
b1-10
improves the control stability
of the motor at zero-speed.
零速时动作
选择
0: Disabled
1: Enabled
* 0 or 1 for flux vector control and open-loop vector 2 control.
Change
during
Setting Factory
Range Setting Opera-
V/f
tion
0 to 3 0 No No
0 or 1 1 No A
0 or 1 0 No A
0 to 2 0 No A
0 or 1 0 No No
User Constant Tables
Control Methods
MEMO-
Open Open
BUS
V/f Loop Flux Loop
Regis-
with Vec- Vec- Vec-
ter
PG tor tor tor
1 2
No No A No 184H
A A A A 185H
A A A A 186H
A A A A 187H
No No No A 1DEH
Page
6-12
-
-
-
-
11
5-