Digital Operator Functions; Setting Digital Operator Functions - YASKAWA varispeed G7 CIMR-G7B series Instruction Manual

Digital Operator Functions

This section explains the Digital Operator functions.

Setting Digital Operator Functions

You can set Digital Operator-related constants such as selecting the Digital Operator display, multi-function
selections, and copy functions.
Related Constants
Con-
stant
Number
o1-02
o1-03
o1-04
o2-01
-148
6
Name
Description
Display
Monitor selec- Sets the monitor item to be dis-
tion after power played when the power is turned
up on.
1: Frequency reference
2: Output frequency
通电监视项目
3: Output current
选择
4: The monitor item set for o1-01
Frequency units Sets the units that will be set and
of reference set- displayed for the frequency refer-
ting and moni- ence and frequency monitor.
tor 0: 0.01 Hz units
1: 0.01% units (Maximum
output frequency is 100%)
2 to 39:
−1
min units (Sets the motor
poles.)
40 to 39999:
User desired display
Set the desired values for setting
and display for the max. output
frequency.
频率指令单位
Set 4-digit number
excluding the decimal
point.
Set the number of digits
below the decimal point
to display.
Example: When the max. output
frequency value is 200.0, set
12000
Setting unit for
frequency con-
Set the setting unit for frequency
stants related to
reference-related constants.
V/f characteris-
0: Hz
tics
−1
1: min
参数设定单位
LOCAL/ Sets the Digital Operator Local/
REMOTE key Remote Key
enable/disable 0: Disabled
1: Enabled (Switches between
the Digital Operator and the
L/R 键功能
constant settings.)
Control Methods
Change
Setting Factory during
V/f
Range Setting Opera-
V/f with
tion
PG
1 to 4 1 Yes A A
0 to
0 No A A
39999
0 or 1 0 No No No
0 or 1 1 No A A
MEMO
Open Open
BUS
Flux
Loop Loop
Regis-
Vec-
Vector Vector
ter
tor
1 2
A A A 501H
A A A 502H
No A A 503H
A A A 505H