YASKAWA varispeed G7 CIMR-G7B series Instruction Manual page 71

PG-D2
The terminal specifications for the PG-D2 are given in the following table.
Terminal
TA1
TA2
* 5 VDC and 12 VDC cannot be used at the same time.
PG-X2
The terminal specifications for the PG-X2 are given in the following table.
Terminal
TA1
TA2
TA3
* 5 VDC and 12 VDC cannot be used at the same time.
-34
2
Table 2.17 PG-D2 Terminal Specifications
No. Contents
1
2 Power supply for pulse generator
3
4 Pulse input + terminal
5 Pulse input - terminal
6 Common terminal
7 Pulse monitor output + terminal
8 Pulse monitor output - terminal
(E) Shield connection terminal
Table 2.18 PG-X2 Terminal Specifications
No. Contents
1
2 Power supply for pulse generator
3
4 A-phase + input terminal
5 A-phase - input terminal
6 B-phase + input terminal
7 B-phase - input terminal
8 Z-phase + input terminal
9 Z-phase - input terminal
10 Common terminal
1 A-phase + output terminal
2 A-phase - output terminal
3 B-phase + output terminal
4 B-phase - output terminal
5 Z-phase + output terminal
6 Z-phase - output terminal
7 Control circuit common
(E) Shield connection terminal
Specifications
12 VDC (±5%), 200 mA max.*
0 VDC (GND for power supply)
5 VDC (±5%), 200 mA max.*
Line driver input (RS-422 level input)
Maximum response frequency: 300 kHz
-
Line driver output (RS-422 level output)
-
Specifications
12 VDC (±5%), 200 mA max.*
0 VDC (GND for power supply)
5 VDC (±5%), 200 mA max.*
Line driver input (RS-422 level input)
Maximum response frequency: 300 kHz
0 VDC (GND for power supply)
Line driver output (RS-422 level output)
Control circuit GND
-