Table of Contents
Advertisement
TableApp.26 SFC control instructions not supported in the Universal model QCPU and replacing methods
Symbol
LD TRn
AND TRn
OR TRn
LDI TRn
ANDI TRn
ORI TRn
Forced transition check
instruction
LD BLm\TRn
AND BLm\TRn
OR BLm\TRn
LDI BLm\TRn
ANDI BLm\TRn
ORI BLm\TRn
Active step change
SCHG(D)
instruction
SET TRn
SET BLm\TRn
Transition control instruction
RST TRn
RST BLm\TRn
BRSET(S)
Block switching instruction
Instruction
When the programmable controller type is changed, these instructions are
converted into SM1255. Modify programs as needed.
Refer to Appendix 3 "Restrictions and replacing method of the Basic model QCPU
and Universal model QCPU" in the QCPU (Q Mode)/QnACPU Programming
Manual (SFC).
Refer to Appendix 3 "Restrictions and replacing method of the Basic model QCPU
and Universal model QCPU" in the QCPU (Q Mode)/QnACPU Programming
Manual (SFC).
When the programmable controller type is changed, these instructions are
converted into SM1255. Modify programs as needed.
Replacing method
APPENDICES
1
2
3
APPEN-
DIX
6
7
8
App - 24
Advertisement
Table of Contents
