Table of Contents
Advertisement
(b) Checking the memory capacity after formatting
Select [Online]
[Read from PLC] in GX Developer.
1) Select "Standard RAM" in "Target memory" on the Read from PLC screen.
Click the
2)
Free space volume
The memory capacity appears in "Total free space volume".
3)
2) Click the
Free space volume button.
Figure 5.10 Procedure for checking the memory capacity
(3)
Writing to the standard RAM
Select [Online]
[Write to PLC] in GX Developer.
Select "Standard RAM" in "Target memory" on the Write to PLC screen
The file size has its minimum unit. (
The occupied memory capacity may be greater than the actual file size.
Note that as the number of files increases, the difference between the occupied memory capacity
and the actual file size increases.
CHAPTER5 MEMORIES AND FILES USED FOR CPU MODULE
button.
1) Select the target memory.
Figure 5.11 Write to PLC screen
Section 5.3.4)
3) The memory capacity
value is shown.
.
1
2
3
4
5
6
7
8
5 - 13
Advertisement
Table of Contents
