Table of Contents
Advertisement
(2) Available devices and number of settable devices
Type
Bit device
Word device
*1: The extended data register (D) is included.
*2: The extended link register (W) is included.
(3) How to check the execution status
The execution status of registered executional conditioned device test can be checked in three different ways:
• By the flash of the MODE LED in green
• By the on status of the first bit of SD840 (Debug function usage)
• By the display on the screen for checking the registration status in GX Developer
(
(4)(d) in this section)
●
The MODE LED also flashes in green when the external input/output forced on/off function is used.
To check the execution status using the MODE LED, check the status of the external input/output forced on/off function
as well. (
●
When using SD840 to check the execution status, remind that SD840 is used to check the status of the external input/
output forced on/off function as well.
6 - 48
Table6.15 Available devices and number of settable devices
X, Y, M, L, B, F, SB, V, SM, T (contact), ST (contact), C (contact), J
J
\B, J
\SB, FX, FY, DX, and DY
T (current value), ST (current value), C (current value), D
ZR, Z, U
\G
, U3E
\G
, J
Digit-specified bit device:
X, Y, M, L, F, SM, V, B, SB, J
Indirect specification (@D0): D, SD, W, SW, R, and ZR (devices specified with
@)
Section 6.11.3)
Available device
*1
, SD, W
\W
, J
\SW
, and FD
\X, J
\Y, J
\B, and J
\SB
Number of settable
devices
\X, J
\Y,
*2
, SW, R,
Up to 32 (in total)
Advertisement
Table of Contents
