Table of Contents
Advertisement
(8) SFC
The mode and conditions for starting an SFC program, and the output mode in the case of a block stop are set.
Item
SFC program start mode
Start conditions
Output mode when the block
is stopped
8 - 11
Table8.8 SFC setting list
Parameter
Description
No.
8002
H
Set the mode and conditions for
8003
starring an SFC program, and also
H
set the output mode in case a
8006
program block is stopped.
H
Figure 8.8 SFC
Setting range
Refer to the QCPU (Q Mode)/
QnACPU Programming Manual
(SFC).
Default
Reference
Initial start
Autostart block 0
-
Turn OFF
Advertisement
Table of Contents
