Table of Contents
Advertisement
(5) Procedures for setting/changing/clearing a remote password
(a) Setting a remote password
• In the project data list of GX Developer, select [Parameter]
Item
Password settings
Model name
Password active
module settings
Start X/Y
Detail
User connection No.
Auto open UDP port
FTP transmission port
(TCP/IP)
System
GX Developer transmission
connection
port (TCP/IP)
GX Developer transmission
port (UDP/IP)
HTTP port
• Connect GX Developer to the CPU module.
• Write a set remote password to the CPU module.
• In multiple CPU systems, write a remote password to the control CPU of the module to which the remote
password is to be set.
Remote password setting
Figure 6.83 Remote password settings screen
Table6.33 Setting items on the Remote password settings screen
Enter a remote password.
Select a model name.
Set the start address of the module.
Select user connection No.
Select a valid port of the remote
password.
[Remote pass].
For the
QnUDE(H)CPU
or QJ71E71,
configure setting
in "Detail".
Description
Four characters or less (alphanumeric
characters, special symbols)
• QnUDE(H)CPU
• QJ71E71
• QJ71C24/CMO
0000
H
-
Connection 1 to Connection 16
CHAPTER6 FUNCTIONS
Setting range/option
to 0FE0
H
-
-
6 - 111
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
