(3)
Writing to the program memory
Select [Online]
[Write to PLC] in GX Developer
Select "Program memory/Device memory" in "Target memory" on the Write to PLC screen
The file size has its minimum unit. (
The occupied memory capacity may be greater than the actual file size.
Note that as the number of files increases, the difference between the occupied memory capacity and the actual file size
increases.
CHAPTER5 MEMORIES AND FILES USED FOR CPU MODULE
.
Figure 5.4 Write to PLC screen
Section 5.3.4)
1
.
2
3
4
5
6
7
8
5 - 7