Cisco ASA 5505 Configuration Manual page 1667

Chapter 74 Configuring Smart Call Home
b.
Smart Call Home Monitoring
To monitor the Smart Call Home feature, perform the following steps:
Path
Tools > Command Line Interface
Type show call- home detail, then click Send.
Tools > Command Line Interface
Type show call-home mail-server status, then click Send.
Tools > Command Line Interface
Type show smart-call- home profile {profile name | all, then
click Send.
Tools > Command Line Interface
Type show call-home registered-module all, then click
Send.
Tools > Command Line Interface
Type show smart-call statistics, then click Send.
Tools > Command Line Interface
Type show call-home, then click Send.
Tools > Command Line Interface
Type show dynamic-filter reports top, then click Send.
Tools > Command Line Interface
Type show dynamic-filter statistics, then click Send.
Tools > Command Line Interface
Type show running-config call-home, then click Send.
OL-20339-01
For monthly subscription, specify the day of the month, as well as the time of the day to send
–
the information. If they are not specified, the adaptive security appliance chooses appropriate
values for them.
For weekly subscription, specify the day of the week, as well as the time of the day to send the
–
information. If they are not specified, the adaptive security appliance chooses appropriate
values for them.
For daily subscription, specify the time of the day to send the information. If it is not specified,
–
the adaptive security appliance chooses an appropriate value for it.
For hourly subscription, specify the minute of the hour to send the information. If it is not
–
specified, the adaptive security appliance chooses an appropriate value for it. Hourly
subscription is only applicable to the snapshot and telemetry alert groups.
Click OK when you are done.
Purpose
Shows the current Smart Call Home detail configuration.
Shows the current mail server status.
Shows the configuration of Smart Call Home profiles.
Shows the registered module status.
Shows call-home detail status.
Shows the current Smart Call Home configuration.
Generates reports of the top ten botnet sites, ports, and infected
hosts.
Shows how many connections were monitored with the Botnet
Traffic Filter, and how many of those connections match the
whitelist, blacklist, and graylist.
Shows the current Smart Call Home running configuration.
Cisco ASA 5500 Series Configuration Guide using ASDM
Smart Call Home Monitoring
74-5