Chapter 71
Configuring Logging
Adding or Editing a Syslog Message ID Filter
To add or edit a syslog message ID filter, see the
on page
Sending Syslog Messages to the Console Port
To send syslog messages to the console port, perform the following steps:
Path
Choose one of the following:
•
Home > Latest ASDM Syslog Messages > Configure
ASDM Syslog Filters
Configuration > Device Management > Logging >
•
Logging Filters
Sending Syslog Messages to a Telnet or SSH Session
To send syslog messages to a Telnet or SSH session, perform the following steps:
Path
Step 1
Choose one of the following:
•
Home > Latest ASDM Syslog Messages > Configure
ASDM Syslog Filters
Configuration > Device Management > Logging >
•
Logging Filters
Step 2
Configuration > Device Management > Logging >
Logging Setup
Creating a Custom Event List
You use the following three criteria to define an event list:
•
•
•
To create a custom list of events to send to a specific logging destination (for example, an SNMP server),
perform the following steps:
Choose Configuration > Device Management > Logging > Event Lists.
Step 1
Step 2
Click Add to display the Add Event List dialog box.
OL-20339-01
71-15.
Event Class
Severity
Message ID
"Adding or Editing a Syslog Message ID Filter" section
Purpose
Specifies which syslog messages should be sent to the console
port.
Purpose
Specifies which syslog messages should be sent to a
Telnet or SSH session.
Enables logging to the current session only.
Cisco ASA 5500 Series Configuration Guide using ASDM
Configuring Logging
71-15