Cisco ASA 5505 Configuration Manual page 1622

Configuring Logging
The selected logging destination for a filter appears at the top.
Note
Adding or Editing a Message Class and Severity Filter
To add or edit a message class and severity level for filtering messages, perform the following steps:
Choose the event class from the drop-down list. Available event classes change according to the device
Step 1
mode that you are using.
Choose the level of logging messages from the drop-down list. Severity levels include the following:
Step 2
•
•
•
•
•
•
•
•
Click OK when you are done making selections.
Step 3
Note
Cisco ASA 5500 Series Configuration Guide using ASDM
71-14
Using a severity level of zero is not recommended.
Emergency (level 0, system is unusable)
Alert (level 1, immediate action is needed)
Critical (level 2, critical conditions)
Error (level 3, error conditions)
Warning (level 4, warning conditions)
Notification (level 5, normal but significant conditions)
Informational (level 6, informational messages only)
Debugging (level 7, debugging messages only)
Using a severity level of zero is not recommended.
Chapter 71 Configuring Logging
OL-20339-01