Front Panel Display - Rice Lake IQ PLUS 710 Installation Manual

1.2

Front Panel Display

Figure 1-1 shows the IQ plus 710 front panel keys and
the key functions assigned in normal mode.
The IQ plus 710 display is divided into three areas
(see Figure 1-2):
¥ The primary display consists of seven large,
14-segment digits used to display weight data.
¥ A two-digit annunciator shows the units
associated with the displayed value: lb=pounds,
kg=kilograms, oz=ounces, T=short tons,
t = m e t r i c t o n s , LT = l o n g t o n s , g = g r a m s ,
GN=grains. When the units conÞgured are troy
pounds or troy ounces, the word
the secondary display area in addition to the
or annunciator. The units can also be set to
oz
NONE (no units information displayed).
2 IQ plus 710 Installation Manual
Figure 1-1. IQ plus 710 Front Panel
is shown in
troy
lb
P R I M A R Y D I S P L A Y
S E C O N D A R Y D I S P L A Y
Figure 1-2. IQ plus 710 Front Panel Display Areas
The two-digit annunciator also displays whether the
indicator is in numeric entry (NE) or alpha entry
(AE) mode for some operations.
The 16-digit secondary display is used to display the
weighing mode (Gross/Brutto or Net) and status
indicators, including standstill (
zero ( ).
The symbols shown over the keys in Figure 1-1
(representing up, down, enter, left, right) describe the
key functions assigned in setup mode. In setup mode,
the keys are used to navigate through menus, select
digits within numeric values, and increment/
decrement values. See Section 3.1.3 on page 14 for
information about using the front panel keys in setup
mode.
2-DIGIT
ANNUNCIATOR
for UNITS,
alpha entry (AE),
numeric entry (NE)
) and center of