Rice Lake IQ PLUS 710 Installation Manual page 30

PROGRM Menu
Parameter Choices
REGULAT NTEP
OIML
NONE
CANADA
Level 3 submenus
DATEFMT MMDDYY
DDMMYY
DATESEP SLASH
DASH
SEMI
TIMEFMT 12HOUR
24HOUR
TIMESEP COLON
COMMA
26 IQ plus 710 Installation Manual
Regulatory mode. Specifies the regulatory agency having jurisdiction over the scale site.
• OIML, NTEP, and CANADA modes allow a tare to be acquired at any weight greater than
zero. NONE allows tares to be acquired at any weight value.
• OIML, NTEP, and CANADA modes allow a tare to be cleared only if the gross weight is at
no load. NONE allows tares to be cleared at any weight value.
• NTEP and OIML modes allow a new tare to be acquired even if a tare is already present.
In CANADA mode, the previous tare must be cleared before a new tare can be acquired.
• NONE, NTEP and CANADA modes allow the scale to be zeroed in either gross or net
mode as long as the current weight is within the specified ZRANGE. In OIML mode, the
scale must be in gross mode before it can be zeroed; pressing the ZERO key in net mode
clears the tare.
• OIML mode replaces the Gross annunciator with Brutto.
The value specified for this parameter affects the function of the front panel TARE and ZERO
keys. See Section 10.3 on page 69 for a complete description of TARE and ZERO key
functions for each of the regulatory modes.
Specifies the format used to display or print the date.
Specifies the date separator character.
Specifies the format used to display or print the time.
Specifies the time separator character.
Table 3-6. Program Menu Parameters (Continued)
Description