Rice Lake IQ PLUS 710 Installation Manual page 38

DIG IN Menu
Parameter Choices
Level 2 submenus
DIGIN1 OFF
DIGIN2 ZERO
DIGIN3 NT/GRS
DIGIN4 TARE
DIGIN5 UNITS
DIGIN6 PRINT
DIGIN7 ACCUM
DIGIN8 SETPNT
TIMDATE
ESC
ALPHAMD
CLEAR
DSPTAR
IDKEY
KF1—KF4
KEY0—KEY9
KEYDP
ENTER
BATRUN
BATSTRT
BATPAUS
KBDLOC
HOLD
CLRCN
GROSS
NET
PRIM
SEC
TIME
DATE
CLRTAR
CLRACC
34 IQ plus 710 Installation Manual
Specifies the function activated by digital inputs 1–8. Default values are: DIGIN1=BATSTRT;
DIGIN2=BATRUN; DIGIN3–DIGIN8=OFF.
• ZERO, NT/GRS (net/gross mode toggle), TARE, UNITS, and PRINT provide the same
functions as the five major front panel keys.
• ACCUM, SETPNT, TIMDATE, ESC, ALPHAMD, CLEAR, DSPTAR, and IDKEY provide the
same functions as the front panel keys.
• KF1—KF4 are equivalent to pressing the macro keys, F1—F4.
• KEY0—KEY9 and KEYDP (decimal point) are simulate pressing keys on the numeric
keypad.
• ENTER simulates pressing the front panel ENTER key.
• BATRUN allows a batch routine to be started and run. With BATRUN active (low), the
BATSTRT input starts the batch; if BATRUN is inactive (high), BATSTRT cancels the batch.
• BATSTRT starts or ends a batch routine, depending on the state of the BATRUN input.
• BATPAUS pauses a batch routine when held low.
• KBDLOC locks the keyboard (indicator front panel) when held low.
• HOLD holds the current display. Releasing this input clears the running average filter.
• CLRCN resets the consecutive number to the value specified on the CONSTUP parameter
(PROGRM menu).
• GROSS, NET, PRIM, and SEC select gross, net, primary units, or secondary units display
modes.
• TIME and DATE inputs show TIME or DATE entry displays. DATE simulates pressing the
TIME/DATE key once; TIME simulates pressing the key twice.
• CLRTAR clears the current tare.
• CLRACC clears the accumulator.
Table 3-8. Digital Input Menu Parameters
Description