Registering A Handset To A Base Unit; Display Language; Belt Clip - Panasonic KX-TGA840C Installation Manual

TGA840C(e).fm Page 5 Wednesday, February 4, 2009 11:00 AM

Registering a handset to a base unit

1
Base unit:
NKX-TG6411/KX-TG7411/KX-TG8411 series
Press and hold {LOCATOR} for about 4 seconds. (No registration
tone)
NKX-TG6421/KX-TG6431/KX-TG7431 series
Press and hold {LOCATOR} for about 4 seconds until the
registration tone sounds.
L If all registered handsets start ringing, press the same button to
stop. Then repeat this step.
L The next step must be completed within 90 seconds.
2
Handset:
Press {OK}, then wait until a long beep sounds.
Note:
L If an error tone sounds, or if _ is still displayed, register the handset
according to the base unit's operating instructions.

Display language

1
{MENU} (centre of joystick) i {#}{1}{1}{0}
2
{V}/{^}: Select the desired setting.
3
Press down the centre of the joystick to save. i {OFF}

Belt clip

N To attach N To remove
5