Vau Port Assignment - Panasonic Section 700 Operation

Section 700 - Operation
2. After the VAU answers, do one of the following:
You want to record the
first message
You want to record the
second message
You want
message
You want to
second message
3. When the operation is complete, put the phone on hook.
Considerations
l

VAU Port Assignment

and
CPC-B Version 5.0 or higher, CPC-A Version 3.3 and higher)
Operation
A digital port can now be assigned as a VAU through system programming.
In previous releases, VAUs were assigned as standard digital ports. Using the
standard digital port assignment required the installer to make the following
program changes:
DBS-70-700
to play the first
play the
Notes:
You can enter the *97 codes again to replay messages without ending
l
y o u r c a l l .
You can only record one message at a time. To record another message,
l
you must end
your call
For more information on the VAU and its operation, see Section 770,
"Voice Announce Unit User Guide."
DBS Manual-- issued 8/l/95
Chapter 2. System Features
Then. . .
Dial * 98 1
Wait for a beep. After the beep. record the
message.
Dial * 98 2
Wait for a beep. After the beep. record the
message.
Dial * 97 1
The VAU plays thC message.
Dial "972
The VAU plays the message.
and
I
2-67