Print Quality Optimisation - Carl Valentin Dynacode IP Series Operating Manual

Dynacode IP Series
Problem
Regular inferior print quality
Partial inferior print quality
(on one side)
Partial inferior print quality (periodical)
08.16

14.6 Print Quality Optimisation

The following table shows some possibilities to improve the print
quality.
Generally you have to note: the higher the print speed the lower the
print quality.
Mögliche Behebung













Operating Manual
Maintenance and Cleaning
Increase contrast
Increase pressure
Reduce print speed
Reduce transfer ribbon speed
Reduce distance between printhead and print
surface
Change combination of transfer ribbon and print
medium
Control print surface (too soft)
Change print angle
Align surface parallel to printhead
Set regular transfer ribbon tension
Set regular printhead angle
Sharp surface even
Reinforce surface against bending
89