Carl Valentin Dynacode IP Series Operating Manual page 16

Operating Conditions
Technical data of
power supply
Anti-interference
measures
Stray radiation and
immunity from
disturbance
Machine safety
16
Power line voltage and power line frequency: See type plate
Allowable tolerance of power line voltage:
+6% ...−10% of nominal value
Allowable tolerance of power line frequency:
+2% ...−2% of nominal value
Allowable distortion factor of power line voltage: <=5%
In case your net is infected (e.g. by using thyristor controlled
machines) anti-interference measures have to be taken. It is possible
to use one of the following possibilities:

Provide separate power supply to our direct print modules.

In case of problems please connect capacity-decoupled isolation
transformer or similar interference suppressor in front of our direct
print modules.
Emitted interference according to EN 61000-6-3: 01-2007

Interference voltage to wires according to EN 55022: 05-2008

Interference field power according to EN 55022: 05-2008

System perturbation according to EN 61000-3-2: 09-2005

Flicker according to EN 61000-3-3: 05-2002
Immunity according to EN 61000-6-2: 03-2006

Stray radiation against discharge of static electricity according to
61000-4-2: 03-2009

Electromagnetic fields according to EN 61000-4-3: 05-2006,
ENV 50204: 03-1995

Fast transient burst according to EN 61000-4-4: 07-2005

Störfestigkeit gegen Stoßspannungen (Surge) gemäß EN 61000-
4-5: 11-2006

High-frequency tension according to EN 61000-4-6: 03-2009

Voltage interruption and voltage drop according to EN 61000-4-
11: 02-2005

EN 60950-1: 2006 - Safety of pachaging machines

EN 60204-1: 2006 - Safety of machinery - Electrical equipment of
machines - Part 1
Operating Manual
Dynacode IP Series
08.16