Carl Valentin Dynacode IP Series Operating Manual page 111

Dynacode IP Series
Definition of password
Activate blocked
function:
08.16
In case no password is defined res. the password protection is not
activated, all functions can be used. In the function menu you will find
the menu item 'Password', where the password can be entered and
the password protection activated.
Press key to change to the function menu.
Press key as long as you arrived the menu Device settings.
Press key to confirm the selection.
Press key as long as you arrived the menu item Password.
Press key to confirm the selection.
F Function menu
CF CF functions
D Print functions
If the password protection is active but the function menu not
protected, first of all the password (four-digit number, possible values
0000 - 9999) has to be entered. Now the modifications can be made.
The user can define the password in the first line (four-digit number).
Press key to continue.
Press keys and
protection.
Press key to change to the second line.
Press keys and
Press keys and
F: Function menu
CF: CF card
D: Device guiding
In order to execute a blocked function, first of all the valid password
has to be entered.
Press key to confirm the entry. If the correct password is
entered then the desired function can be executed. If a wrong
password is entered, no error message appears but the device returns
to the main menu.
Operating Manual
to activate/deactivate (Yes/No) the password
to block/open individual function groups.
to change to the next group.
0...open
1...locked
0...open
1...only reading access
2...access blocked
0...open
1...open
2...no manual print release
Additional Information
113