Carl Valentin Dynacode IP Series Operating Manual page 101

Dynacode IP Series
Error message
64 Zero point
65 Compressed air
66 External releaser
67 Row too long
68 Scanner
69 Scanner NoRead
70 Scanner data
71 Invalid page
72 Page selection
73 Page not defined
74 Format user guiding
75 Format date/time
76 Hotstart CF
77 Flip/Rotate
78 System file
79 Shift variable
80 GS1 Databar
81 IGP error
08.16
Cause
Defective photocell.
Pressure air is not connected.
External print release signal is
missing.
Wrong definition of column
width res. number of columns.
The connected bar code
scanner signals a device error.
Bad print quality.
Printhead completely soiled or
defective.
Print speed too high.
Scanned data does not
correspond to the data which is
to print.
As page number either 0 or a
number > 9 is selected.
A page which is not available is
selected.
The page is not defined.
Wrong format for customised
entry.
Wrong format for date/time.
No CF card found.
Selection of print of several
columns and also mirror/rotate.
Loading of temporary hotstart
files.
Faulty definition of shift times
(overlapping times).
General GS1 Databar error.
Protocol error IGP.
Operating Manual
Error correction
Remedy
Change photocell.
Check pressure air.
Check input signal.
Reduce the column width res.
correct the number of columns.
Check the connection
scanner/printer.
Check scanner (dirty).
Increase contrast.
Clean printhead or exchange (if
necessary).
Reduce print speed.
Exchange printhead.
Select a number between 1
and 9.
Check the defined pages.
Check the print definition.
Check the format string.
Check the format string.
If option hotstart was activated,
a CF card must be inserted.
Switch off the printer before
inserting the memory card.
It is only possible to select one
of both functions.
Not possible.
Check definition of shift times.
Check definition and parameter
of GS1 Databar code.
Check sent data.
101