Firmware Update; Filter - Carl Valentin Dynacode IP Series Operating Manual

Thermal transfer coder

Table of Contents

Compact Flash Card / USB Memory Stick

Procedure

Without filter

With filter

13.7 Firmware Update

Starting from firmware version 1.58 it is possible to make a firmware

update also via the memory menu. Both the USB stick as well as the

CF card can be used for this.

On the CF card / USB memory stick a directory is created in which the

necessary update files are stored (firmware.prn, data.prn). By means

of the function Load file the file firmware.prn is selected/loaded. In the

first step the printer executes the firmware update. After the necessary

restart automatically the file data.prn is loaded. In this way the

remaining components were updated. is After a renewed restart the

update procedure is finished.

For certain functions a filter mask or a file name of a file which is to be

saved can be entered. This input is indicated in the path line. It is

possible with the filter mask to look for certain files. For example, with

the input of 'L' only the files are listed whose character string starts

with 'L' (regardless of upper and lower cases).

Operating Manual

Dynacode IP Series

08.16

Table of Contents

Do you have a question about the Dynacode IP Series and is the answer not in the manual?