Carl Valentin Dynacode IP Series Operating Manual page 105

Dynacode IP Series
Error message
123 Print asynchronous
124 Speed too slow.
08.16
Cause
The label photocell do not work
in the order as it is expected
according to print data.
The settings of the photocell
are not correct.
Settings of label size and gap
size are not correct.
No label found at the rear
printhead.
Soiled label photocell.
Labels not inserted correctly.
The print speed is too slow.
Operating Manual
Error correction
Remedy
Check label size and gap size.
Check label photocell settings.
Check correct loading of label
material.
Insert new label roll.
Clean the label photocell.
Check if labels are inserted
correctly.
Increase the speed of
customers' machine.
105