Figure 30: System Status Leds - Front And Rear Sides; Table 13: Status Leds - Mellanox Technologies SX10XX Hardware User Manual

Table 13 - Status LEDs
Symbol
*In SX1024 and SX1400, PS1 and PS2 are combined into one LED
3.2.1.1 System Status LED
Both of the System Status LEDs (front and back) supply identical information.
It may take up to five minutes to turn on the system. If the System Status LED shows
red after five minutes, unplug the system and call your Mellanox representative for
assistance.
44 Mellanox Technologies
Name
System Status LED
Fan Status LED
Power supply #1*
Power supply #2*
Bad Port LED
Unit Identifier LED

Figure 30: System Status LEDs - Front and Rear sides

Both of these LEDs show the
system's status.
Rear side
status LED
Description
Shows the health of the system
Shows the health of the fans
Shows the health of the right side power supply
unit
Shows the health of the left side power supply unit Green
lights up when a symbol error is detected on one
of the ports.
Lights up on command through the CLI
Normal Conditions
Green
Green
Green
Off
Off
Front side
status LED
Interfaces