Dodge dakota 2002 Service Manual page 1364

DR
CAMSHAFT(S) - LEFT (Continued)
(3) Install the camshaft bearing caps, hand tighten
the retaining bolts.
(4) Working in ⁄
1
2
bearing cap retaining bolts starting with the middle
cap working outward (Fig. 27).
Fig. 27 Camshaft Bearing Caps Tightening
Sequence
1 - LEFT CYLINDER HEAD
turn increments, tighten the
Fig. 28 Timing Chain to Sprocket Alignment
(5) Torque the camshaft bearing cap retaining
bolts to 11 N·m (100 in. lbs.).
(6) Position the camshaft drive gear into the tim-
ing chain aligning the V8 mark between the two
marked chain links (Two links marked during
removal) (Fig. 28).
NOTE: When gripping the camshaft, place the pliers
on the tube portion of the camshaft only. Do not
grip the lobes or the sprocket areas.
2 - RIGHT CYLINDER HEAD
ENGINE - 4.7L 9 - 115