To Lock The Front Panel Immediately; To Program Local Lockout; To Unlock The Front Panel - Orban OPTIMOD-FM 8500S Operating Manual

OPTIMOD-FM DIGITAL
B) Turn the knob until you see the passcode you want to delete.
C) Press the Next button. The Confirm Delete screen appears.
D) Press the Y
buttons to abort deleting the passcode.

To Lock the Front Panel Immediately:

After you have adjusted the processor, to maximize security you will often want
to lock it immediately without waiting for the timeout. To do so:
A) Press the Setup button.
B) Press the L
OCK

To Program local lockout:

A) Navigate to Setup > S
If the front panel is already password protected, you can only access this
screen by entering a passcode with A
B) Hold down the A
lockout time (if any).
You can program the lockout delay time (in hours:minutes) from 15 min-
utes to 8 hours, or O
local front panel control and when the front panel automatically locks it-
self out, requiring that you enter a passcode to regain front panel con-
trol of the 8500S.
Autolock can only be turned on if at least one passcode exists with A
A
CCESS
unlock the panel or to turn off the Autolock function.
C) Press the Escape button to leave the Security menu.

To Unlock the Front Panel:

A) On the 8500S front panel, operate any button or the knob.
The P
ASSCODE
B) Enter a passcode using the four soft buttons.
The 8500S functionality that you can access depends on the security level
of the passcode that you entered.
After you have finished working, the panel will automatically re-lock af-
ter the time delay you set in Setup > S
new delay at any time if you have an A
soft button to delete the passcode. Press the NO or ESCAPE
ES
N soft button.
OW
.
ECURITY
soft button and turn the knob to set the desired
UTOLOCK
. This is the time delay between the last access to a
FF
privileges because an A
screen will appear.
A privileges.
LL CCESS
passcode is required to fully
A
LL CCESS
> A
ECURITY UTOLOCK
passcode.)
A
LL CCESS
INSTALLATION
LL
. (You can set a
2-41