Orban OPTIMOD-FM 8500S Operating Manual page 93

OPTIMOD-FM DIGITAL
Note that setting DT M
defeat Daylight Time functionality.
c) Press the Escape key to back out of the daylight saving screen.
D) (Optional) Press the S
sign or call letters).
a) Use the knob to select characters. Use the Prev and Next buttons to move
the cursor.
b) When you are finished, press
2. Navigate to Setup > Next > Automation.
If the A
UTOMATION
able automation.
This button allows you to easily enable or disable all automation events
without having to edit individual automation events.
3. To add an automation event:
A) Push the A
DD
B) Choose whether you wish to program an event that occurs only once or an
event that follows a daily or weekly schedule.
C) For events that occur only once:
a) Use the Prev and Next buttons to move the cursor over the word "
and turn the knob so that is reads "
b) Use the Prev and Next buttons to move the cursor to the day, month, and
year when the automation event will occur. Set the desired values with the
knob.
c) Use the Prev and Next buttons to move the cursor set the hour, minute, and
second (in 24-hour format) when the automation event is to occur. Set the
desired values with the knob.
D) For events that occur on a daily or weekly schedule:
a) Use the Prev and Next buttons to move the cursor the each day of the week
in turn, and use the rotary encoder to turn the day on or off.
You can program the event to occur on as many days of the week as you
wish.
b) Use the Prev and Next buttons to move the cursor set the hour, minute, and
second (in 24-hour format — e.g., 18:00:00 for 6:00 PM) when the
automation event is to occur. Set the desired values with the knob.
Automation events have a "start" time but no "stop" time. The 8500S
will indefinitely remain in the state specified by an existing automation
event until its state is changed by another automation event or by an-
other action (such as a user's interacting with the front panel or PC Re-
mote software).
, DT W
ONTH
ID button to specify your station's identifier (call
TATION
S
AVE
button reads D
ISABLED
button.
E
VENT
, or ST W
, ST M
EEK ONTH
.
, hold it down and turn the knob to en-
" instead.
DATE:
INSTALLATION
to O will
EEK FF
"
DAILY:
2-37