Troubleshooting Windows Xp Direct Connect - Orban OPTIMOD-FM 8500S Operating Manual

Digital audio processor
Table of Contents

Advertisement

5-12
TROUBLESHOOTING

Troubleshooting Windows XP Direct Connect:

E) Select the "General" tab and make sure that "Connect Using" displays the
correct modem and port.
F) Click the "Configure..." button.
G) Set the "Maximum Speed (bps) to 115200.
H) Check the "Enable hardware flow control," make sure all other hardware fea-
tures are unchecked. Then click "OK."
I) Click the "Networking" tab on the "Properties" window.
J) Set "Type of dial-up server I am calling" to "PPP: Windows 95/98/NT4/2000,
Internet."
K) Select the "Settings" button and make sure all PPP settings are unchecked.
Then click "OK."
L) In "Components checked are used by this connection," uncheck all except for
"Internet Protocol (TCP/IP)."
M) Select "Internet Protocol (TCP/IP)" and then click the "Properties" button. The
"Internet Protocol (TCP/IP) Properties" window opens.
N) Choose "Obtain an IP address automatically" and "Obtain DNS server address
automatically"
O) Click the "Advanced..." button on the "Internet Protocol (TCP/IP)" Window.
P) In the "Advanced TCP/IP Settings" select the "General" Tab; make sure that
no check boxes are checked.
Q) Click "OK" to dismiss the "Advanced TCP/IP Settings" window.
R) Click "OK" to dismiss the "Internet Protocol (TCP/IP) Properties" window.
S) Click "OK" to dismiss the window whose name is your new connection.
T) Click "Cancel" to dismiss the "Connect [nnnn]" dialog box
U) Restart your computer.
Although not strictly necessary, this resets the serial port and reduces the
likelihood that you will encounter problems connecting to the 8500S.
If you are having trouble establishing a connection, check your New Connection's
properties to make sure they are set up correctly:
A) Click "Start > Programs > Accessories > Communications > Network Connec-
tions" to bring up the Network Connections screen.
B) In the "Network Connections" window, right-click "Optimod 8500S - Direct"
and choose "Properties."
C) The "Properties" window opens for "Optimod 8500S - Direct."
ORBAN MODEL

Advertisement

Table of Contents
loading

Table of Contents