To Delete A Passcode; To Lock The Front Panel Immediately; To Program Local Lockout - Orban Optimod-FM 8300 Operating Manual

2-34
INSTALLATION

To Delete a Passcode:

To Lock the Front Panel Immediately:

To Program local lockout:

If the front panel is already password protected, you can only access this
screen by entering a passcode with A
B) Turn the knob until you see the passcode you want to edit.
C) Press the N button. The Permissions screen appears.
EXT
D) Turn the knob to set the desired permission level for the passcode you are ed-
iting.
E) Press the N button to confirm your choice.
EXT
Your new permission level is stored and the Security menu appears.
A) Navigate to S
ETUP
If the front panel is already password protected, you can only access this
screen by entering a passcode with All Access privileges.
B) Turn the knob until you see the passcode you want to delete.
C) Press the N button. The Confirm Delete screen appears.
EXT
D) Press the Y soft button to delete the passcode. Press the NO or ESCAPE
ES
buttons to abort deleting the passcode.
After you have adjusted the processor, to maximize security you will often want
to lock it immediately without waiting for the timeout. To do so:
A) Press the S button.
ETUP
B) Press the L N
OCK OW
A) Navigate to S / S
ETUP
If the front panel is already password protected, you can only access this
screen by entering a passcode with A
B) Hold down the A
UTOLOCK
lockout time (if any).
You can program the lockout delay time (in hours:minutes) from 15 min-
utes to 8 hours, or O
local front panel control and when the front panel automatically locks it-
self out, requiring entering a passcode to obtain front panel control of
the 8300.
Autolock can only be turned on if at least one passcode exists with A
A privileges because an A
CCESS
unlock the panel or to turn off the Autolock function.
LL
/ S / D P
ECURITY ELETE ASSCODES
soft button.
.
ECURITY
LL
soft button and turn the knob to set the desired
. This is the time delay between the last access to a
FF
A
LL CCESS
ORBAN MODEL 8300
A privileges.
CCESS
.
privileges.
A
CCESS
passcode is required to fully
LL