Figure 2-1: Ac Line Cord Wire Standard - Orban OPTIMOD-FM 8500S Operating Manual

2-2
INSTALLATION
TYPE 18/3 SVT COR, TYP
(3 x .82 mm 2 )
PLUG FOR
115 VAC
(USA)
TYPE H05VV - F - 0.75
PLUG FOR
230 VAC
(EUROPEAN)
2. Install the appropriate power cord.
AC power passes through an IEC-standard mains connector and an RF filter de-
signed to meet the standards of all international safety authorities.
The power cord is terminated in a "U-ground" plug (USA standard), or CEE7 / 7
plug (Continental Europe), as appropriate to your 8500S's Model Number. The
green/yellow wire is connected directly to the 8500S chassis.
If you need to change the plug to meet your country's standard and you are
qualified to do so, see Figure 2-1. Otherwise, purchase a new mains cord with the
correct line plug attached.
3. Mount the 8500S in a rack.
The 8500S requires one standard rack unit (1 ¾ inches / 6.4 cm).
There should be a good ground connection between the rack and the 8500S
chassis — check this with an ohmmeter to verify that the resistance is less than
0.5Ω.
Mounting the unit over large heat-producing devices (such as a vacuum-tube
power amplifier) may shorten component life and is not recommended. Ambient
temperature should not exceed 45°C (113°F) when equipment is powered.
Equipment life will be extended if the unit is mounted away from sources of vi-
bration, such as large blowers and is operated as cool as possible.
4. Connect inputs and outputs.
See the hookup and grounding information on the following pages.
WIRE COLOR
CONDUCTOR
NORMAL
L
LINE BROWN
NEUTRAL
N BLUE
E
EARTH GND GREEN-YELLOW
CONDUCTOR WIRE COLOR
L
LINE
N NEUTRAL
E
EARTH GND GREEN-YELLOW

Figure 2-1: AC Line Cord Wire Standard

ALT
BLACK
WHITE
GREEN
BROWN
BLUE
ORBAN MODEL