Connecting Using Windows Xp Direct Serial Connection - Orban OPTIMOD-FM 8500S Operating Manual

2-66
INSTALLATION

Connecting Using Windows XP Direct Serial Connection

2. Launch an existing Windows 2000 Direct connection.
Once you have set up a "connection" specifying Direct Connect in the 8500S PC
Remote application (see To set up a new connection on page 3-81), choosing this
connection from 8500S PC Remote automatically opens a Windows Direct Con-
nection to your 8500S.
You can connect by selecting
the desired connection from
the drop-down list in the
menu.
C
ONNECT
You can also connect by dou-
ble-clicking the connection in
the "Connection List" window.
A dialog bubble will appear
on the bottom right hand cor-
ner of the screen verifying
your connection if the connec-
tion is successful.
If you have trouble making a connection, refer to OS Specific Troubleshooting
Advice: Troubleshooting Windows 2000 Direct Connect on page 5-10. If you have
trouble the first time after creating a connection according to the instructions
above, try restarting your computer to clear its serial port.
3. To change the properties of an existing connection:
Right-click the connection in the "connection List" window and choose "Proper-
ties." The "Connection properties" window opens (see page 2-62).
If you have already configured your direct serial cable connection, skip to step
page 2- .
70
If you cannot access the Internet after making a Direct or Modem con-
nection, you will have to reconfigure certain networking parameters in
Windows.
Making a Direct or Modem Connection to the 8500S on page 5-9.
1. Add and configure a Direct Connection for Windows XP:
A) Create a New Windows XP Direct Con-
nection:
a) Launch 8500S PC Remote.
b) Choose "Connect > New 8500S"
Please see You Cannot
ORBAN MODEL
Access the Internet
on
2
After