To Modify Automation; To Group Multiple 8500S Units; Operation Using The Keyboard; To Quit The Program - Orban OPTIMOD-FM 8500S Operating Manual

3-86
OPERATION
To modify A

To group multiple 8500S units:

Operation Using the Keyboard

To Quit the Program

To set a control, click it (it will become highlighted) and then use the wheel on
the mouse to adjust it. You can also use the + and – keys on the numeric keypad
to adjust any control.
UTOMATION
A) Choose A
UTOMATION
An Automation Dialog box will open.
B) Click the N
E
EW VENT
Controls to set the event type and time are available on the right hand
side of the dialog box.
C) Check the E
NABLE
able automation.
Right-click A C
LL ONNECTIONS
You can add multiple 8500S to a single group to help organize a network
of 8500S. However, only one 8500S from within a group can be con-
nected to 8500S PC Remote at any one time.
As far as possible, PC Remote uses standard Windows conventions for navigation.
Navigate around the screens using the TAB key. Use CTRL-TAB to move to the next
tabbed screen in PC Remote.
Use the + and – keys or the left and right arrow keys on the numeric keypad to ad-
just control settings.
Use standard Windows conventions: Press ALT-F4 on the keyboard, or click the X on
the upper right corner with the mouse.
Also, please note the following behavior:
•
If you close the PC Remote connection from the PC, you will be given the choice
of staying connected through the ppp or disconnecting.
•
If you close the connection from PC Remote but choose not to close the ppp con-
nection, the E
PC R
ND
panel. If you then select that button, the ppp connection will close.
:
from the T menu.
OOLS
to create a new event
A check box at the top of the dialog box to en-
UTOMATION
in the Connections List and select N
button will remain displayed on the 8500S's front
EMOTE
ORBAN MODEL 8500S
G .
EW ROUP