Connecting Using Windows 7 Direct Serial Connection - Orban OPTIMOD-FM 8500S Operating Manual

OPTIMOD-FM DIGITAL
3. To change the properties of an existing connection:
Right-click the connection in the "connection List" window and choose "Proper-
ties." The "Connection properties" window opens (see page 2-62).

Connecting Using Windows 7 Direct Serial Connection:

You must install the Windows 7 direct serial connection as a modem device using the
Modem setup procedures as shown in the steps below.
4. Add and configure a Direct Connection for Windows 7.
A) Go to the Control Panel. Find the Mo-
dem applet. This is normally under the
Phone and
Click on it to start the Phone and Mo-
dem applet.
Modem section.
2-71
INSTALLATION