Automation Using The 8500S's Internal Clock - Orban OPTIMOD-FM 8500S Operating Manual

2-36
INSTALLATION

Automation Using the 8500S's Internal Clock

S L
AFETY IMITER
crease by 3 dB when you set the BS.1770 S
B) Navigate to the Setup > I/O C
C) Set the 1770 L
IM
D) Set the L T
OUD HR
broadcast as specified by the regulatory authority in your country.
E) After you have chosen a Processing Preset and adjusted it to your taste (step
13 on page 2-21, you must set the preset's HD L
propriate amount of gain reduction in the BS.1770 Safety Limiter. Then save
the result as a User Preset. We recommend allowing the BS.1770 Safety Lim-
iter to produce no more than 3 dB of gain reduction.
13. End Analog and Digital I/O setup.
If you are using an external AGC and you temporarily set the E
step 1 on page 2-26, set the E
14. Select a processing preset.
See step 13 on page 2-21.
1. If you have not already done so, set the system clock.
[As an alternative to setting the clock manually, you can set the clock automati-
cally via PC Remote or the Internet. See Synchronizing Optimod to a Network
Time Server starting on page 2-54.]
A) Navigate to Setup > Next > T
a) Set hours and minutes.
b) Enter seconds slightly ahead of the correct time.
c) Wait until the entered time agrees with the correct time. Then press the
E T button to set the clock.
NTER IME
B) Press the S D
ET ATE
a) Set today's date, using the days, month, and year buttons.
b) Press the E
NTER
C) Press the D
AYLIGHT
a) Using the Daylight Saving (DT M
and week when Daylight Saving Time (Summer Time) begins, or O
b) Using the Standard Time (ST M
and week when Daylight Saving Time (Summer Time) ends.
control ON and OFF. In our example, the loudness will de-
> HD C
ALIB
control to O .
N
control to be equal to the target integrated loudness of your
AGC to Y
XT
D A
IME ATE ND
button.
button.
D
ATE
button.
T
IME
ONTH
ONTH
L to OFF.
AFETY IMITER
screen.
ALIB
D
IMITER RIVE
.
ES
.
ID > S T
ET IME
and DT W ) buttons, set the month
EEK
and ST W ) buttons, set the month
EEK
ORBAN MODEL
to create the ap-
AGC to NO in
XT
.
FF