Orban OPTIMOD-FM 8500S Operating Manual page 136

2-80
INSTALLATION
H) In the Advance TCP/IP Set-
tings window, click on the
Advance
a) Unselect Use
gateway on
network.
b) Click OK to close this
window.
This prevents Win-
dows 7 from rout-
ing all networking
requests to
Optimod.
c) Click OK to
Internet Protocol version 4
Properties window.
d) Click OK at the Direct
Serial PPP
window to save the Direct
Serial PPP settings.
7. Launch an existing Windows 7 Direct connection.
Once you have set up a "connection" specifying Direct Connect in the 8500S PC
Remote application (see To set up a new connection on page 3-81), choosing this
connection from 8500S PC Remote automatically opens a Windows Direct Con-
nection to your 8500S.
You can connect by selecting the desired con-
nection from the drop-down list in the C
menu.
You can also connect by double-clicking the
connection in the "Connection List" window.
A dialog bubble will appear on the bottom right
hand corner of the screen verifying your con-
nection if the connection is successful.
If you have trouble making a connection, double-check step (6.F) on page 2-78. If
you have trouble the first time after creating a connection according to the in-
structions above, try restarting your computer to clear its serial port.
8. To change the properties of an existing connection:
Right-click the connection in the "connection List" window and choose "Proper-
ties." The "Connection properties" window opens (see page 2-62).
button.
default
remote
your
close the
Properties
ONNECT
ORBAN MODEL