Orban OPTIMOD-FM 8500S Operating Manual page 144

2-88
INSTALLATION
If you are using an external modem, connect the modem to a serial port
on your PC and make sure the modem is connected to a working phone
line.
b) On your PC, click "Start / Settings / Control Panel / Phone and Modem
Options."
c) Click the "Modems" tab.
d) Verify that your modem appears in the list available under "The following
Modems are installed."
e) Verify that your modem is "Attached to" the correct port.
If your modem is unavailable or not attached to the correct port, you will
need to Add it. See your Windows documentation.
f) If your modem is available in the list available under "The following
Modems are installed" and it is attached to the correct port, then click
"Properties" for that modem.
g) Make sure the port speed is set at 115200.
h) Click "OK."
C) Create a new Windows XP modem
connection:
a) Launch 8500S PC Remote.
b) Choose "Connect / New 8500S."
The Connection Proper-
ties window opens.
c) Give your 8500S a name (e.g.,
"KABC") by entering this name
in the "8500S Alias" field.
d) If you wish to have 8500S PC
Remote remember the password
for this Optimod, enter the pass-
word in the "Password" field.
You must enter a valid
password to connect. This
means that at least one
8500S passcode
have been assigned via
the 8500S's front panel.
(See To Create a Passcode
on page 2-40.)
must
ORBAN MODEL