Orban OPTIMOD-FM 8500S Operating Manual page 75

OPTIMOD-FM DIGITAL
must configure Digital Output #1 to be flat or pre-emphasized outside of
Quick Setup.
B) Set Digital Output #2 to be flat or pre-emphasized.
See the notes in step (10.B) above.
a) Press the Next button.
b) [Skip this step if you will not be using the digital output to drive your
analog FM transmitter.]
Turn the knob to choose P
J.17 (for a J.17 pre-emphasized output), P
emphasis cascaded with J.17 pre-emphasis), or F
75µs de-emphasis after the processing).
Regardless of the setting of this control, the processing is always inter-
nally pre-emphasized and thus always controls peaks to follow the 50 or
75µs pre-emphasis curve.
C) Set Digital Output #2 sample rate.
a) Press the Next button.
b) [Skip this step if you will not be using Digital Output #2.]
Turn the knob to set the Digital O
or 96 kHz.
The internal sample rate converter sets the rate at the 8500S's digital
output. This adjustment allows you to set the output sample rate to ensure
compatibility with equipment requiring a fixed sample rate. In all cases, the
8500S's fundamental sample rate is 64 kHz. To pass the processed signal
without addition of overshoot, the STL must be flat to 17 kHz. If you are
using a digital STL, this usually requires using a sample rate of 44.1 kHz or
higher in the STL. 32 kHz will add considerable overshoot.
If the DO S
IO / D
IGITAL
be defeated. To set this control internally you must have the P
set to Internal and the DO S
D) Set Digital Output #1 sample rate.
a) Press the Next button.
b) [Skip this step if you will not be using Digital Output #1.]
Turn the knob to set the Digital O
or 96 kHz.
12. Set output levels.
A) Prepare to set output levels.
a) Press the Next button.
(for a 50 or 75µs pre-emphasized output),
-
RE E
and P S controls have been previously set in the
YNC ILOT YNC
O calibration screens, the O
UT
set to P
YNC
UTPUT
+J17 (for 50 or 75µs pre-
RE
(which applies 50 or
LAT
S R to 32, 44.1, 48, 88.2,
UTPUT AMPLE ATE
S R
UTPUT AMPLE ATE
.
S
ILOT YNC
to 32, 44.1, 48, 88.2,
S R
AMPLE ATE
INSTALLATION
control might
S
ILOT YNC
2-19