Automation Using The 8300'S Internal Clock - Orban Optimod-FM 8300 Operating Manual

2-30
INSTALLATION

Automation Using the 8300's Internal Clock

10. Select a processing preset.
See step 18 on page 2-21.
1. If you have not already done so, set the system clock.
[You can also set the clock automatically via PC Remote or the Internet. See
Synchronizing Optimod to a Network Time Server starting on page 2-39.]
A) Navigate to S
ETUP
a) Set hours and minutes.
b) Enter seconds slightly ahead of the correct time.
c) Wait until the entered time agrees with the correct time. Then press the
button to set the clock.
E T
NTER IME
B) Press the S
D
ET ATE
a) Set today's date, using the days, month, and year buttons.
b) Press the
E
NTER
C) Press the D
AYLIGHT
a) Using the Daylight Saving (DT M
and week when Daylight Saving Time (Summer Time) begins, or O
b) Using the Standard Time (ST M
and week when Daylight Saving Time (Summer Time) ends.
Note that setting DT M
defeat Daylight Time functionality.
c) Press the Escape key to back out of the daylight saving screen.
D) (Optional) Press the S
sign or call letters).
a) Use the knob to select characters. Use the P
the cursor.
b) When you are finished, press
2. Navigate to Setup / Next / Automation.
If the A
UTOMATION
able automation.
This button allows you to easily enable or disable all automation events
without having to edit individual automation events.
/ N / T D A
EXT IME ATE
button.
button.
D
ATE
button.
T
IME
ONTH
ONTH
,
DT W
ONTH
ID button to specify your station's identifier (call
TATION
.
S
AVE
button reads D
ISABLED
.
ID / S T
ND ET IME
and DT W ) buttons, set the month
EEK
and ST W ) buttons, set the month
EEK
, , or ST W
ST M
EEK ONTH EEK
and N
REV EXT
, hold it down and turn the knob to en-
ORBAN MODEL 8300
.
FF
to O will
FF
buttons to move