Table of Contents
Advertisement
OPTIMOD-FM DIGITAL
Troubleshooting Windows XP Direct Connect:
If you are having trouble establishing a connection, check your New Connection's
properties to make sure they are set up correctly:
A) Click "Start / Programs / Accessories / Communications / Network Connections"
to bring up the Network Connections screen.
B) In the "Network Connections" window, right-click "Optimod 8300 - Direct"
and choose "Properties."
C) The "Properties" window opens for "Optimod 8300 - Direct."
D) Click the "Networking" tab.
E) Set "Type of dial-up server I am calling" to "PPP: Windows 95 / 98 / NT4 / 2000,
Internet"
F) Select the "Settings" button and make sure all PPP settings are unchecked,
then click "OK."
G) In "This connection uses the following items," uncheck all except for "Internet
Protocol (TCP/IP)." You can also leave "QoS Packet Scheduler" checked if you
like.
H) In "This connection uses the following items," select "Internet Protocol
(TCP/IP)" and then click the "Properties" button. The "Internet Protocol
(TCP/IP) Properties" window opens.
I) Choose "Obtain an IP address automatically" and "Obtain DNS server address
automatically."
J) Click the "Advanced..." button on the "Internet Protocol (TCP/IP)" Window.
K) In the "Advanced TCP/IP Settings" select the "General" Tab; make sure that
no check boxes are checked.
L) Click "OK" to dismiss the "Advanced TCP/IP Settings" window.
M) On the "Properties" window for "Optimod 8300 – Modem" click the "Ad-
vanced" tab.
N) Click "OK" to dismiss the window whose name is your new connection.
O) Click "Cancel" to dismiss the "Connect [nnnn]" dialog box.
P) Restart your computer.
This resets the serial port and reduces the likelihood that you will en-
counter problems connecting to the 8300.
Troubleshooting Windows XP Modem Connect:
If you are having trouble establishing a connection, check your New Con-
nection's properties to make sure they are set up correctly.
TROUBLESHOOTING
5-11
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
