To Share An Archived User Preset Between 8300S; To Modify Input /Output And System Setup; To Modify Automation - Orban Optimod-FM 8300 Operating Manual

OPTIMOD-FM DIGITAL
a) Set the
F
*.orb85user)
b) Highlight all the user presets in the dialog window
c) Click the
E) To restore a system file:
a) Set the
F
b) Select the desired system file in the dialog box.
c) Click the
F) To restore an automation file:
a) Set the
F
b) Select the desired automation file in the dialog box
c) Click the
G) Click DONE to dismiss the RESTORE dialog box.

To share an archived User Preset between 8300s:

A) Navigate to the directory containing the desired User Preset from within the
R F
ESTORE ROM
B) Click the R
ESTORE
This User Preset will be downloaded to the 8300 to which 8300 PC Re-
mote is currently connected.
If the User Preset is encrypted, PC Remote will request its password.
To modify I
NPUT
Choose SETUP from the TOOLS menu.
To set a control, click it (it will become highlighted) and then use the wheel on
the mouse to adjust it. You can also use the + and – keys on the numeric keypad
to adjust any control.
To modify A
UTOMATION
A) Choose A
UTOMATION
An Automation Dialog box will open.
B) Click the N
EW
Controls to set the event type and time are available on the right hand
side of the dialog box.
C) Check the E
able automation.
field to a user preset file type (*.orb83user, *.orbu,
O T
ILES F YPE
button.
R
ESTORE
field to the System Setup file type (*.orb83setup).
O T
ILES F YPE
button.
R
ESTORE
field to the Automation file type (*.orb83autom)
O T
ILES F YPE
button.
R
ESTORE
PC dialog box
button.
/O and S
UTPUT YSTEM
:
from the T
OOLS
E to create a new event
VENT
A check box at the top of the dialog box to en-
NABLE UTOMATION
S :
ETUP
menu.
3-67
OPERATION