Connection To Stepper-Motor Controller With 5V Signal Level (X5); Connection To Stepper-Motor Controller With 24V Signal Level (X3) - Kollmorgen SERVOSTAR 601 Assembly And Installation Manual

Kollmorgen
3.7.1

Connection to stepper-motor controller with 5V signal level (X5)

This interface can be used to connect the servo amplifier to a stepper-motor controller with 5V sig-
nal level. The connector X5 must be used.
Edge frequency: 1,5MHz
AGND and DGND (connector X3) must be joined together !
SERVOSTAR 600
3.7.2

Connection to stepper-motor controller with 24V signal level (X3)

This interface can be used to connect the servo amplifier to a stepper-motor controller with 24V sig-
nal level. The digital inputs DIGITAL-IN 1 and 2 at connector X3 must be used.
Edge frequency: 250 kHz
AGND and DGND (connector X3) must be joined together !
SERVOSTAR 600
®
SERVOSTAR 601...620 Installation Manual
03/04
Interfaces
51