Nameplate; Instrument Description; Package Supplied - Kollmorgen SERVOSTAR 601 Assembly And Installation Manual

Kollmorgen
1.3

Nameplate

The nameplate depicted below is attached to the side of the servo amplifier.
The information described below is printed in the individual fields.
Servo amplifier type
Danaher Motion GmbH
Wacholderstr. 40-42
D-40489 Düsseldorf
www.DanaherMotion.net
Typenbezeichnung
Spannungsversorgung
Electrical supply
Installed load
1.4

Instrument description

1.4.1

Package supplied

When you order a SERVOSTAR 600 series amplifier, you will receive:
—
—
The mating SubD connectors and motor connector X9 are not part of the package!
—
—
—
Accessories: (must be ordered separately)
—
—
—
—
—
—
—
®
SERVOSTAR 601...620 Installation Manual
Model Number
Power Supply
SERVOSTAR 6xx
mating connectors X3, X4, X0A, X0B, X7, X8
Assembly, Installation and Setup Instructions
Online documentation on CD-ROM
Setup software DRIVE.EXE on CD-ROM
AC synchronous servomotor (linear or rotary)
motor cable (pre-assembled), or both motor connectors separately, with motor cable as a
cut-off length
feedback cable (pre-assembled, see application note "Cables and connectors") or both
feedback connectors separately, with feedback cable as length
motor choke 3YL-20 (ð p.90), for cable length above 25m
external regen resistor (ð p.73)
communications cable to the PC(ð p.52) or Y-adapter (ð p.57) for setting parameters of up
to 6 servo amplifiers from one PC
power cable, control cables, fieldbus cables (as lengths)
03/04
Serial number
Customer Support
Europe Tel. +49 (0)203 / 99790
Italy Tel. + 9 (0) 3 36 2 /
North America Tel. + ( 1 80 0) 777-3786
Ser. Nr
Nennstrom Nom. Current
Output current
in S1 operation
CONNECT-module
and options
594260
Ser. No. Bemerkung
Schutzart
Enclosure Rating
General
Comment
Encl.Rating
13