Detector Sensitivity; 1: Sensitivity Select - Honeywell nfs2-3030 Programming Manual

Detector Sensitivity

4.3 Detector Sensitivity
This screen is displayed when the "Detector Sensitivity" soft key is pressed on the Alter Status
Menu screen.
Soft Keys
POINT: Press to place the cursor in the format field. Type the address using the keyboard.
NEXT/PREVIOUS SELECTION: Press these soft keys to scroll sequentially through the detector
addresses on the loop. The screen will display the next loop when the last device on this loop is
passed.
ACCEPT: Press to proceed to the Detector Sensitivity screen.
4.3.1 Sensitivity Select
Detector sensitivity levels, set during initial programming, may be changed through accessing the
Detector Sensitivity Select screen and the command screen that follows. The Detector Sensitivity
Select screen is displayed when the ACCEPT: soft key is pressed at the Sensitivity Select Point
screen.
NFS2-3030 Programming Manual — P/N 52545:K1 03/20/2012
L A K E V I E W G E N E R A L H O S P I T A L
S Y S T E M N O R M A L
1 0 : 2 2 : 3 4 A T U E J A N 2 5 , 2 0 1 1
P O I N T S E L E C T
P O I N T : L y y D z z z ( D E T E C T O R )
N E X T S E L E C T I O N
P R E V I O U S S E L E C T I O N
Figure 4.4 Sensitivity Select Point Screen
Alter Status
A C C E P T
B A C K
73