Delete Program - Honeywell nfs2-3030 Programming Manual

Delete Program

3.5 Delete Program
Press the
display the screen below.
Soft Keys
CLEAR ALL PROGRAMMING: Press to remove all panel, loop, point and ACS programming
information, as well as logic and trouble zone equations. Pressing this key removes everything
except passwords. A confirmation screen will display asking the user to confirm the deletion
command. Pressing this key causes a reboot.
CLEAR:PANEL Press to remove all programmed panel setting information from control panel
memory. This does not remove ACS programming. A confirmation screen will display asking the
user to confirm the deletion command. Pressing this key causes a reboot.
CLEAR LOOPS Press to scroll through the options: ALL, LOOP 1, LOOP 2, ..., LOOP 10. Stop at
the desired option. Press ACCEPT to delete all loop programming for the selected option. Pressing
this key causes a reboot.
DELETE POINT To delete a point, press this soft key to display the Delete Point screen.
CLEAR ACS: Press to remove all ACS programming from panel memory. A confirmation screen
will display asking the user to confirm the deletion command. Pressing this key causes a reboot.
ACCEPT: Press to clear all programming for the selected loop option for CLEAR LOOPS. A
confirmation screen will display asking the user to confirm the deletion command.
NFS2-3030 Programming Manual — P/N 52545:K1 03/20/2012
D E L E T E P R O G R A M M E N U
D E L E T E P R O G R A M M E N U
C L E A R : P A N E L
C L E A R L O O P S : A L L
D E L E T E P O I N T
Figure 3.55 Delete Program Menu Screen
at the
P R O G R A M / A L T E R S T A T U S M E N U
C L E A R A L L P R O G R A M M I N G
C L E A R A C S
Program
menu to
A C C E P T
B A C K
65