3: Network Mapping - Honeywell nfs2-3030 Programming Manual

Fire alarm control panel
Hide thumbs Also See for nfs2-3030:
Table of Contents

Advertisement

Program
3.2.3 Network Mapping
The Network Mapping softkey is only available if the Network Display Mode option is enabled.
Pressing the softkey will display the following screen. Refer to Appendix J, "Network Display
Mode", on page 152.
There are 15 of these screens covering nodes 1 through 240. Each screen will have 16 nodes on it.
The up and down arrow keys are used to select which node to edit. When a field is selected, the
NEXT SELECTION/PREVIOUS SELECTION keys will toggle between OFFLINE/ONLINE,
MAPPED/UNMAPPED.
OFFLINE - The node is not communicating on the network.
ONLINE - The node is communicating on the network.
MAPPED - Events are annunciated by the NFS2-3030.
UNMAPPED (blank) - Events are ignored by the NFS2-3030.
NOTE: The NFS2-3030 can be programmed to monitor events and initiate drill on one (1) additional fire
panel and up to four (4) DVCs.
NEXT navigates to the next screen in the sequence. The last screen will not have a NEXT key.
BACK will go to the preceding screen in the sequence or to the Node Programming menu if the
current screen is the first one in the 15-screen sequence. ACCEPT implements any changes that
have been made up to this point and returns the user to the Node Programming menu. AUTO
PROGRAM will consult the internal map of which nodes are on the network and automatically set
all 240 Nodes according to the map, regardless of which screen is being shown. The results will not
be saved to flash until the ACCEPT key is pressed.
Main menu
Program/alter status menu
Panel program menu
Network mapping
20
N E T W O R K M A P P I N G
S C R E E N 0 1 O F 1 5
0 0 1 : O F F L I N E /
0 0 3 : O N L I N E
/ M A P P E D 0 0 4 : O F F L I N E /
0 0 5 : O F F L I N E /
0 0 7 : O F F L I N E /
0 0 9 : O N L I N E
/ M A P P E D 0 1 0 : O F F L I N E /
0 1 1 : O F F L I N E /
0 1 3 : O F F L I N E /
0 1 5 : O F F L I N E /
A U T O P R O G R A M
N E X T
Figure 3.5 Program Menu: Network Mapping
NFS2-3030 Programming Manual — P/N 52545:K1 03/20/2012
0 0 2 : O F F L I N E /
0 0 6 : O F F L I N E /
0 0 8 : O F F L I N E /
0 1 2 : O F F L I N E /
0 1 4 : O F F L I N E /
0 1 6 : O F F L I N E /
A C C E P T
Panel Program
B A C K

Advertisement

Table of Contents
loading

Table of Contents