Honeywell nfs2-3030 Programming Manual page 49

Point Program
ALARM SENSITIVITY TABLE: This table will toggle from ALARM to PREALARM based on
which sensitivity value is being entered. The table will display the values for this type of detector.
Detector Occupancy Schedule

Soft Keys
WEEKLY OCCUPANCY SCHEDULE: Press this soft key to place the cursor at the underlined
field. There can be up to ten Weekly Occupancy Schedules. Enter a value of zero through ten. Zero
indicates no schedule is applied, and occupied detector sensitivity values are used.
ACCEPT: Press this key to accept the change made and return to the previous screen.
Detector Point Programming (3)
Press the MORE soft key on the Detector Point Programming (2) screen to display this screen.
Soft Keys
LOW TEMP ENABLE: Press this softkey to select YES or NO to enable the Low Temperature
Warning for the PHOTO/CO detector. This field is only available when programming a
PHOTO/CO smoke detector.
NFS2-3030 Programming Manual — P/N 52545:K1 03/20/2012
D E T E C T O R O C C U P A N C Y S C H E D U L E
W E E K L Y O C C U P A N C Y S C H E D U L E : 1 0
S U N D A Y
M O N D A Y 0 8 : 0 0 - 1 2 : 0 0 , 1 3 : 0 0 - 1 8 : 0 0
T U E S D A Y 0 8 : 0 0 - 1 2 : 0 0 , 1 3 : 0 0 - 1 8 : 0 0
W E D N E S D A Y 0 8 : 0 0 - 1 2 : 0 0 , 1 3 : 0 0 - 1 8 : 0 0
T H U R S D A Y 0 8 : 0 0 - 1 2 : 0 0 , 1 3 : 0 0 - 1 8 : 0 0
F R I D A Y 0 8 : 0 0 - 1 2 : 0 0 , 1 3 : 0 0 - 1 8 : 0 0
S A T U R D A Y 0 8 : 0 0 - 1 2 : 0 0 ,
H O L I D A Y U N O C C U P I E D
Figure 3.37 Detector Occupancy Schedule Screen
D E T E C T O R P O I N T P R O G R A M M I N G
L O W T E M P E N A B L E : Y E S
P R E A L A R M : A L E R T
S I L E N C E A B L E : N O
I N T E L L I G E N T S O U N D E R : Y E S
S O U N D E R B A S E S E T U P
Figure 3.38 More Detector Point Programming (3) Screen
- -
-
A C C E P T
L 0 3 D 1 2 3
C O P R E - A L A R M : Y E S
A C C E P T
Program
B A C K
B A C K
49