Command And Hardware Compatibility; Fips Compliance; Aaa Configuration Considerations And Task List - HP MSR Series Configuration Manual

No. Subattribute
Output-Interval-Gigaword
206
s
207 Backup-NAS-IP
255 Product_ID

Command and hardware compatibility

Commands and descriptions for centralized devices apply to the following routers:
•
MSR1002-4/1003-8S.
•
MSR2003.
•
MSR2004-24/2004-48.
•
MSR3012/3024/3044/3064.
•
MSR954(JH296A/JH297A/JH299A)
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.

FIPS compliance

The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode (see
non-FIPS mode.

AAA configuration considerations and task list

To configure AAA, complete the following tasks on the NAS:
1. Configure the required AAA schemes:
Local authentication—Configure local users and the related attributes, including the
usernames and passwords, for the users to be authenticated.
Remote authentication—Configure the required RADIUS, HWTACACS, and LDAP
schemes.
2. Configure AAA methods for the users' ISP domains. Remote AAA methods need to use the
configured RADIUS, HWTACACS, and LDAP schemes.
Description
Amount of bytes output within an accounting interval, in units of 4G
bytes.
Backup source IP address for sending RADIUS packets.
Product name.
18
"Configuring FIPS") and