Effect Parameters - Yamaha TF5 Reference Manual

Effect parameters

REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE
One-input, two-output hall, room, stage, and plate reverbs.
Parameter Range
Reverb Time 0.3s–20.0s
Initial Delay 1.0ms–500.0ms
High Ratio 0.1–1.0
Diffusion 0–10
Density 0% – 100%
HPF Thru, 21.2Hz–8.00kHz
LPF 50.0Hz–16.0kHz, Thru
MONO DELAY
One-input, two-output basic repeating-type delay.
Parameter Range
Delay 1.0ms–2700.0ms
Feedback Gain -99 – +99
High Ratio 0.1–1.0
HPF Thru, 21.2Hz–8.00kHz
LPF 50.0Hz–16.0kHz, Thru
Sync Off, On
Note ----, ~
STEREO DELAY
Two-input, two-output basic stereo delay.
Parameter Range
Delay L 1.0ms–1350.0ms
Delay R 1.0ms–1350.0ms
Feedback Gain L -99 – +99
Feedback Gain R -99 – +99
High Ratio 0.1–1.0
HPF Thru, 21.2Hz–8.00kHz
LPF 50.0Hz–16.0kHz, Thru
Sync Off, On
Note L
----, ~
Note R
----, ~
Description
Determines the length of the reverberation.
Determines the amount of time that passes before the initial
reverberation is heard.
Ratio of high frequency reverberations to the Reverb Time.
Left and right spread of the reverberation.
Density of the reverberation.
High-pass filter cutoff frequency.
Low-pass filter cutoff frequency.
Description
Delay time.
Amount of feedback.
Amount of high-frequency feedback.
High-pass filter cutoff frequency.
Low-pass filter cutoff frequency.
Delay time tempo sync.
Value used to calculate the delay time based on the tempo.
Description
Left channel delay time.
Right channel delay time.
Left channel feedback gain.
Right channel feedback gain.
Amount of high-frequency feedback.
High-pass filter cutoff frequency.
Low-pass filter cutoff frequency.
Delay time tempo sync.
Value used to calculate the left channel delay time based on the
tempo.
Value used to calculate the right channel delay time based on
the tempo.
DELAY LCR
One-input, two-output 3-tap delay.
Parameter Range
Delay L 1.0ms–2700.0ms
Delay C 1.0ms–2700.0ms
Delay R 1.0ms–2700.0ms
Delay FB 1.0ms–2700.0ms
Feedback Gain -99 – +99
High Ratio 0.1–1.0
HPF Thru, 21.2Hz–8.00kHz
LPF 50.0Hz–16.0kHz, Thru
Level L -100 – +100
Level C -100 – +100
Level R -100 – +100
Sync Off, On
Note L
----, ~
Note C ----, ~
Note R
----, ~
Note FB
----, ~
ECHO
Two-input, two-output stereo delay with a crossed feedback loop.
Parameter Range
Delay L 1.0ms–1350.0ms
Delay R 1.0ms–1350.0ms
Delay FB L 1.0ms–1350.0ms
Delay FB R 1.0ms–1350.0ms
Feedback Gain L -99 – +99
Feedback Gain R -99 – +99
XFeedback Gain -99 – +99
High Ratio 0.1–1.0
HPF Thru, 21.2Hz–8.00kHz
LPF 50.0Hz–16.0kHz, Thru
Sync Off, On
Note L
----, ~
Note R ----, ~
Note FBL
----, ~
Note FBR
----, ~
- 54 -
Configuration screens
Description
Left channel delay time.
Center channel delay time.
Right channel delay time.
Feedback delay time.
Amount of feedback.
Amount of high-frequency feedback.
High-pass filter cutoff frequency.
Low-pass filter cutoff frequency.
Left channel level.
Center channel level.
Right channel level.
Delay time tempo sync.
Value used to calculate the left channel delay time based on the
tempo.
Value used to calculate the center channel delay time based on
the tempo.
Value used to calculate the right channel delay time based on
the tempo.
Value used to calculate the delay feedback time based on the
tempo.
Description
Left channel delay time.
Right channel delay time.
Left channel feedback delay time.
Right channel feedback delay time.
Left channel feedback gain.
Right channel feedback gain.
Left-to-right, right-to-left feedback gain.
Amount of high-frequency feedback.
High-pass filter cutoff frequency.
Low-pass filter cutoff frequency.
Delay time tempo sync.
Value used to calculate the left channel delay time based on the
tempo.
Value used to calculate the right channel delay time based on
the tempo.
Value used to calculate the left channel feedback delay time
based on the tempo.
Value used to calculate the right channel feedback delay time
based on the tempo.
TF Series
Reference Manual