Additional Setup; Modifying User Accounts And Default Password - HP Integrity rx2660 User's & Service Manual

2. Log in using the default the iLO 2 MP user name and password (Admin/Admin). The MP
Main Menu screen appears.
TIP: For security reasons, HP strongly recommends that you modify the default settings during
the initial login session. See
The MP Main Menu screen displays the following menu options:
MP MAIN MENU:
CO: Console
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show Event Logs
HE: Main Menu Help
This example shows the MP Main Menu accessed through the local serial port. The list of commands
displayed on the screen can be different depending on the method of access to the iLO 2 MP.
When logging in using the local or remote RS-232 serial ports, the login prompt might not display
if another user is logged in through these ports. Use Ctrl-B to access the MP Main Menu and the
iLO 2 MP MP> prompt.

Additional Setup

This section provides additional information to help you set up the iLO 2 MP.

Modifying User Accounts and Default Password

The iLO 2 MP comes preconfigured with default factory settings, including a default user account
and password. The two default user accounts at initial login are as follows:
All Rights (Administrator) level user: login = Admin password = Admin
Console Rights (Operator) level user: login = Oper password = Oper
NOTE:
IMPORTANT:
during the initial login session.
Make the following changes using any of the iLO 2 MP user interfaces.
To modify default account configuration settings:
1. Log in as the administrator. You must log in as the administrator in order to modify default
user configuration settings.
2. To modify default passwords:
a. Access the MP Main Menu.
b. Enter CM at the MP> prompt.
c. Enter UC at the MP:CM> prompt and follow the prompts to modify default passwords.
3. To set up user accounts:
a. Access the MP Main Menu.
b. Enter CM at the MP> prompt.
c. Enter UC at the MP:CM> prompt and follow the prompts to modify user accounts.
"Modifying User Accounts and Default Password" (page
X: Exit Connection
User account and password are case sensitive.
For security reasons, HP strongly recommends that you modify the default settings
Connecting and Setting Up the Console
73).
73